Thanks to the resilience of the steel, the glass panes cn be secured soley by the frame, which cross section is consequently thinner, lighter, and more modern looking.
The jambs were designed to highlight the beauty of the different materials. They are predominantly flat, but rounded at the edges. |

» Stainless Steel
Steel is different, this is the main reason why a cross section in stainless steel can be considerably inferior in size to one in aluminum, and it can hold glass panes of impressive dimensions without transversal sections.
Stainless steel is forever, weather proof and rust proof, it is exceptionally durable in time and is not subject to aesthetic change.
» Cor Ten Steel
Cor-Ten steel is unique. Its natural oxidizing process produces a protective coating of an extraordinary aesthetic effect stable in time. It is unusually valuable due to its rarity because to date not widely used but its beauty is immediately recognizable.
» Burnished Brass
Burnished brass is copper, zinc and tradition all in one. Antique buildings, prestigious homes of the nobility, modern architecture, burnished brass is the one metal allow that may be used in modern design yet is representive of tradition. Its natural burnishing process considerably increases its endurance in time and its aesthetic beauty.

» Statified Glass
A glass pane made up of two sheets of glass with a plastic film between them that detains the glass fragments in order to guarantee the maximum saftey in case of breakage.
» Tempered Glass
Monolithic glass pane with high shock and thermal resistance up to code UNI 12150 in reference to stress point and safety regulations regarding breakage into small fragments.
|
| |
Stainless Steel
The sections, made from 8/10 thick stainless steel colis AISI304 with a scotch brite finish up to code UNI 10088, are obtained by means of cold-forming technologies and mechanically joined for maximum strength. The plates and reels are made from a non-magnetic chrome-nickel austenitic, resistant to corrosion that eliminates the need of maintenance
Cor-Ten Steel
The sections, made from 10/10 thick, high-strength, auto-passivating steel colis up to code UNI EN 10155, are obtained by means of cold-forming technologies and mechanically joined for maximum strength. A special aging process speeds up the time rquired for it develop its own atmospheric permanent protection that makes it corrosion resistant.
Burnished Brass
The sections, made from 10/10 thick brass colis OT67, a 67% copper and 33% zinc alloy, up to code UNI 10088, are obtained by means of cold-forming technologies and mechanically joined for maximum strength. After the forming procedure the profiles are subjected to a standardization process to avoid the phenomena known as season cracking. A special aging process speeds up the burnishing that makes it corrsosion resistant.
Stratified Glass
A glass pane made up of two sheets of glass with a plastic film between them that detains the glass fragments in order to guarantee the maximum saftey in case of breakage. Stratified glass up to code UNI EN 7172 and UNI EN 12150, guarantees a high resistance to breakage and sound proofing up to 33 dB. Stratified glass is available in four finishes.
- Clear Glass: Both sides of the pane are smooth and the plastic film between the two sheets of glass is perfectly clear for maximum visibility and light.
- Translucent: both sides of the pane are smooth but the plastic film is slightly opaque for diffused light and lower visibility.
- Acide-etched: one side is smootha nd the other one opaque with a transparent plastic film between them for a diffsued light effect and lower visibility.
- Coloured: made from two clear and smooth sheets of glass with a plastic film and a layer of coloured resin between them. Available in wide array of colors to meet every taste.
Temperate Glass
Monolithic glass pane with high shock and thermal resistance up to code UNI 12150 in reference to stress point and safety regulations regarding breakage into small fragments.
Temperate glass is available in two different finishes:
- Clear: Smooth on both sides, it guarantees maximum visibility and light.
- Acid-etched: Smooth on one side and opaque on the other, for a diffused light.
|
|